How to Make LED Lights Stick on Textured Walls: Tips and Tricks

How to Make LED Lights Stick on Textured Walls

Do you have a textured wall and you’re looking for, How to Make LED Lights Stick on Textured Walls? Are you unsure how to make them adhere to uneven surfaces? Well, don’t worry, because we’re here to help! In this blog post, we will discuss some tips and tricks that will help you make your LED lights stick on textured walls. We’ll also provide some helpful advice on how to adhere LED lights to popcorn walls. So, whether you’re looking for a temporary or permanent solution, read on for some helpful tips!

How to Make LED Lights Stick on Textured Wall?

4 5

1. Use Adhesive Strips or Double side foam tape

If you have a textured wall, one option is to use adhesive strips or Double side foam tape. You can find these at most hardware stores or online. Just cut the adhesive strip to fit within the borders of the LED strip, and then adhere it to the back of the strip. This will provide a cushion and help keep the strip in place on all those bumps and uneven surfaces.

2. Use Command Strips

Another option is to use command strips. These also come in various sizes, so you can find one that will fit your needs. Just follow the instructions on the package and adhere the strips to the back of the LED strip. This should give you a stronghold that will last for a long time.

How to make LED lights stick on Popcorn walls ??

2 1

1. Use Push Pin

2 3

if you have popcorn walls, you may be wondering how to make LED lights stick. One option is to use push pins. Just insert the push pins into the wall where you want to place the strip and then adhere the strip to the pins. This will provide a stronghold that will keep your strip in place.

2. Use Adhesive Velcro strips

3 5

Another option is to use velcro strips. Just adhere the velcro straps to the back of the LED strip and then stick them to the wall. This will give you a stronghold that is also easily removable.

One of the best ways to make LED lights stick on textured walls is by using adhesive Velcro. This will help keep the lights in place, and it’s a temporary solution that can be easily removed when you’re done using them.

3. Use Command Hooks

4 6

Another option is to use Command hooks. These hooks are designed to hold up heavy objects, so they’re strong enough to keep your LED lights in place. Just make sure to follow the instructions on the package, so that you don’t damage your walls.

3. Some Permernate Soutions

If you’re looking for a more permanent solution, then you can try using nails or screws. Just be careful not to damage your walls when you’re putting them in. You may also want to use a level to make sure they’re straight.

Finally, if you have popcorn walls, then there are a few special tips you need to follow. The first thing you need to do is remove the popcorn ceiling. Then, you’ll need to smooth out the surface and apply a coat of paint or primer. Once that’s done, you can start attaching your LED lights. We recommend using adhesive Velcro or Command hooks in this case.

We hope these tips and tricks have helped you figure out how to make LED lights stick on textured walls. If you have any other questions or need further assistance, feel free to contact us and we would be happy to help! Thanks for reading!

Related Article – How to Connect Multiple Led Strip Lights

How To Hang Led Strip Lights On Wall Without Adhesive.

One way to hang LED strip lights on a wall without adhesive is by using push pins. Just insert the push pins into the wall where you want to place the strip and then adhere the strip to the pins. This will provide a stronghold that will keep your strip in place.

Another way to hang LED lights on a wall without adhesive is by using command hooks. Just follow the instructions on the package and adhere the hooks to the back of the LED strip. This should give you a stronghold that will keep your strip in place.

Another option is to use nails or screws. Just be careful not to damage your walls when you’re putting them in. You may also want to use a level to make sure they’re straight

You can also use magnets if you have drywall then they will be screws that will be holding the wall but they will not be visible at their will under the paint and putty.

Once you find out the positions of them you can order magnet coins and using those you can Hang Led Strip Lights On Wall Without Adhesive

Related Article – Best Led Strip Lights For Display Cases

Conclusion

There are many ways that you can Hang Led Strip Lights On Wall Without Adhesive. You can use push pins, command hooks, nails or screws, or magnets. Just be careful not to damage your walls when you’re putting them in.

We hope these tips and tricks have helped you figure out how to make LED lights stick on textured walls. If you have any other questions or need further assistance, feel free to contact us and we would be happy to help

Leave a Comment

Your email address will not be published.